You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Bradleys' Facilities and Equipment

Bradleys EASA Accredidation for 2022

The list below describes the sizes and equipment Bradleys uses to service your motors

  • Area devoted to service work: 50,000 sq. ft (4,646 sq. m) and over
  • Area regularly serviced (radius from plant): 200 miles (321 km) or over
  • Largest hoist or crane capacity: 10 tons (9,072 kg) or over
  • Height & width of largest service entrance: At least 12 x 14 ft (3.6 x 4.3 m)
  • Lathe equipment: 48 in (121 cm) or more
  • Dynamic balancing equipment: 5,000 lbs (2,268 kg) or over
  • Burnout oven (inside width and height and depth): At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dipping equipment (length and width and depth): At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Vacuum-pressure impregnation (VPI) equipment: Epoxy resin ... equipment diameter: 10 ft (2.436 - 3.045 m) and larger
  • Bake oven (inside width and height and depth): At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)

Contact Bradleys Motors

Main Office:
600 East Highway 35
Gregory, Texas 78359

Phone: (361) 643-0100
Toll Free: 800-880-1213

Mailing Address:
P.O. Box 308
Gregory, Texas 78359
Email: info@bradleysmotors.com

AC Electric Motor Rewinding or Rebuilding
  • Single Phase Motors
  • Polyphase Motors less than 50 hp
  • Polyphase Motors up to 200 hp
  • Polyphase Motors over 200 hp
  • Polyphase Motors with formed coils
  • Polyphase Motors over 600 volts
  • Wound Rotors
  • AC Generator rewinding less than 50 kW
  • AC Generator rewinding over 50 kW
  • UL or CSA Hazardous Location Rebuilding
  • Hazardous Area Equipment Rebuilding
  • ISO 9000

Electrical Apparatus Sales

  • Single-phase Electric Motors
  • Polyphase Electric Motors
  • DC Motors
  • Gear Motors, Speed Reducers
  • Adjustable-speed Drives
  • Generators
  • Pumps
DC Motor or Generator Rewinding or Rebuilding
  • DC Motors or generators less than 10 kW
  • DC Motors or generators 10 kW and Over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and Over
  • Armature Rewinding
  • DC Welders - rotating
  • DC Welders - static

Transformer Servicing

  • Air Cooled Rebuilding
  • Air Cooled Rewinding
  • Oil Filled Rewinding
  • Welder Transformer Rewinding
  • Auto Transformer Rewinding

Specialty Machine Rewinding or Rebuilding

  • Traction
  • Hoist
  • Cryogenic
  • DC Lifting Magnets
Mechanical Servicing
  • Dynamic Balancing
  • General Machine Shop
  • Metal Spraying
  • Pump Repairing
  • Rotor Rebarring

Field Service

  • Vibration Analysis
  • Alignment
  • Laser Alignment
  • Portable Balancing
  • Thermography

Load Testing (Dynamometer Ranges)

  • Under 125 hp
  • 125 to 250 hp
  • 251 to 500 hp
  • Over 500 hp

Contact Us

Mailing Address:

P.O. Box 308
Gregory, Texas 78359